page 1 of 10 mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2010 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. 3.5-6.0 ghz 3w power amplifier module march 2010 - rev 30-mar-10 p1044-ql 34 dbm p1db pout 26 dbm @ evm = 2.5% (par=9.17 db) 46 dbm oip3 18.5 db gain 8v voltage supply input internally matched 7x7mm surface mount package ideal for wimax applications @ 5.8 ghz and applications between 4 ghz and 5 ghz features absolute maximum ratings drain supply voltage (vd) gate supply voltage (vg) rf input power (rfin) stage 1 current (idd1) stage 2 current (idd2) power dissipation (pdc) storage temperature junctions temperature operating temperature esd (hbm) moisture sensitivity level thermal resistance (rth)* +9.0v 0v ~ -5v +23 dbm 375 ma 750 ma 9.0w -55 to +150 o c 175 oc -40 oc to see note 1 class 1a msl3 15.6 oc general description the xp1044 is a highly linear 2-stage power amplifier capable of 18.5 db of gain, 34 dbm of power at 1 db compression and is housed in an rohs compliant 7x7mm package. the xp1044 provides less than 2.5% evm at 26 dbm output power with 802.16 ofdm signal and peak to average ratio 9.17 db. the input and output of the device are internally pre-matched facilitating a simplified input and output match. this product operates off an 8v voltage supply and requires negative voltage which is used for current control. the XP1044-QL is specifically designed for wimax applications between 4.9 ghz and 5.9 ghz, and the performance can be shifted by adding external matching components to cover applications between 3.5 ghz and 5.0 ghz. unless otherwise specified, the following specifications are guaranteed at room temperature in a mimix test fixture. *thermal resistance of stage 2 only (1) calculate maximum operating backside temperature using: tmax = 167 c C [vd*idd2*rth]. thermal resistance of the 1st stage is 2x rth of the output stage, and therefore idd1 must not exceed ? idd2 for a specific maximum temperature electrical characteristics (t=25 o c) parameter frequency range (f ) power gain linear power (@ evm=2.5%, ofdm, 802.16 par=9.17 db) input return loss (s11) output ip3 @ 22 dbm/tone noise figure output p1db stage 1 supply current (idd1) state 2 supply current (idd2) stage 1 gate voltage (vg1) stage 2 gate voltage (vg2) supply voltage (vd1 & vd2) units ghz db dbm db dbm db dbm ma ma v v v min. 4.9 16.5 44 32.5 -1.2 -1.2 typ. 5.8 18.5 26.0 -10.0 46.0 5 34.0 300 600 -0.85 -0.85 8.0 max. 5.9 -0.5 -0.5 in production test idd1 is set to 300ma and idd2 is set to 600 ma by varying vg1 and vg2.
p1044-ql page 2 of 10 mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2010 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. 3.5-6.0 ghz 3w power amplifier module march 2010 - rev 30-mar-10 evaluation board layout: ev1 (4.9 ghz ~ 5.9 ghz) ref designato r description qty c 1 , c 2 10 . 0 p f 0402 c apa ci to r 1 c3, c4, c5, c 6 1000 p f 0402 c a p a ci t o r 4 2 c 1 c c 3 c 4 c 5 c 6 c 7 c 9 c 1 0 c7, c8, c9, c10 1 uf a-case capacitor 4 0 1 c 9 c c5 c6 2 d v 1 d v c 8 t u o f r n i f r 2 c 1 c material: rogers 4003 thickness: 8mil 8 c 7 c c3 c4 2 g v 1 g v dimensions are in inches. i nput match details output match details for improved performance at 6 ghz the thick transmission line (w=0.069) on the output can be extended to touch the two open stubs.
p1044-ql page 3 of 10 mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2010 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. 3.5-6.0 ghz 3w power amplifier module march 2010 - rev 30-mar-10 XP1044-QL: gain vs frequency 1 5 1 6 1 7 1 8 1 9 2 0 (db) 1 0 1 1 1 2 1 3 1 4 4 .8 4. 9 5 5 .1 5 .2 5. 3 5.4 5 .5 5 .6 5. 7 5.8 5 .9 6 frequency (ghz) XP1044-QL: input return loss (s11) vs frequency - 8 - 6 - 4 - 2 0 - 16 - 14 - 12 - 10 - 8 4. 8 4 . 9 5 5 . 1 5 . 2 5 . 3 5 . 4 5 . 5 5. 6 5 . 7 5 . 8 5 . 9 6 frequency (ghz) s (db) XP1044-QL: wcdma 3gpp downlink acpr vs. pout vd=8v, idq1=300ma, idq2=600ma - 4 4 - 4 0 - 3 6 - 3 2 4 . 9 g h z 5 . 0 g h z 5 . 1 g h z 5 . 2 g h z 5 . 3 g h z 5 4 g h - 6 0 - 5 6 - 5 2 - 4 8 2 3 2 3 2 4 2 4 2 5 2 5 2 6 2 6 2 7 2 7 2 8 2 8 pout (dbm) acpr (dbc) 5 . 4g h z 5 . 5 g h z 5 . 6 g h z 5 . 7 g h z 5 . 8 g h z 5 . 9 g h z 6 . 0 g h z XP1044-QL: input return loss (s22) vs frequency -4 -3 -2 -1 0 -1 0 -9 -8 -7 -6 -5 4 . 8 4 . 9 5 5 . 1 5 . 2 5 . 3 5 . 4 5 . 5 5 . 6 5 . 7 5. 8 5 . 9 6 s (db) frequency (ghz) XP1044-QL: power vs. frequency vd=8v, idq1 = 300ma, idq2 = 600ma 3 3 3 3 . 5 3 4 3 4 . 5 3 5 3 0 3 0 . 5 3 1 3 1 . 5 3 2 3 2 . 5 3 3 4 9 5 0 5 1 5 2 5 3 5 4 5 5 5 6 5 7 5 8 5 9 6 0 pout (dbm) p1 d b ps at 4 . 9 5 . 0 5 . 1 5 . 2 5 . 3 5 . 4 5 . 5 5 . 6 5 . 7 5 . 8 5 . 9 6 . 0 frequency (ghz) XP1044-QL: oip3 vs. pout vd=8v, idq1=300ma, idq2=600ma 4 7 4 8 4 9 5 0 5 1 5 2 4 .9 g h z 5 .0 g h z 5 .1 g h z 3 8 3 9 4 0 4 1 4 2 4 3 4 4 4 5 4 6 4 7 1 8 1 9 2 0 2 1 2 2 2 3 2 4 2 5 2 6 2 7 2 8 oip3 (dbm) 5 .2 g h z 5 .3 g h z 5 .4 g h z 5 .5 g h z 5 .6 g h z 5 .7 g h z 5 .8 g h z 5 .9 g h z 6 .0 g h z pout/tone (dbm) typical performance: (ev1, idq1 = 300 ma, idq2 = 600 ma)
p1044-ql page 4 of 10 mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2010 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. 3.5-6.0 ghz 3w power amplifier module march 2010 - rev 30-mar-10 XP1044-QL: gain vs. frequency vs. temp 1 8 1 9 2 0 2 1 2 2 1 4 1 5 1 6 1 7 1 8 4. 9 5 5. 1 5 .2 5 . 3 5 .4 5 .5 5 . 6 5 .7 5 . 8 5 .9 6 frequency (ghz) gain (db) +2 5oc - 40 oc +8 5oc XP1044-QL: p1db vs. frequency vs. temp 3 2 3 4 3 6 2 4 2 6 2 8 3 0 4 . 9 5 5 . 1 5. 2 5. 3 5. 4 5. 5 5. 6 5. 7 5. 8 5 . 9 6 p1db (dbm) + 25 o c - 4 0 o c + 85 o c frequency (ghz) XP1044-QL: oip3 vs. frequency vs. temp 4 6 4 8 5 0 5 2 4 0 4 2 4 4 4 6 4. 9 5 5. 1 5 .2 5 . 3 5 .4 5 .5 5 . 6 5 .7 5 . 8 5 .9 6 frequency (ghz) oip3 (dbm) +2 5oc - 40 oc +8 5oc XP1044-QL: wcdma acpr vs. frequency vs. temp 30 - 2 0 - 1 0 0 + 2 5o c - 4 0 o c - 6 0 - 5 0 - 4 0 - 30 4. 9 5 5. 1 5 . 2 5 . 3 5. 4 5. 5 5 . 6 5 . 7 5. 8 5. 9 6 frequency (ghz) acpr (dbc) 4 0 c + 8 5o c typical performance: (ev1, idq1 = 300 ma, idq2 = 600 ma, over temp)
p1044-ql page 5 of 10 mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2010 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. 3.5-6.0 ghz 3w power amplifier module march 2010 - rev 30-mar-10 XP1044-QL: p1db vs. frequency vd=8v, idq1 = 330ma, idq2 = 660ma 3 3 33 .5 3 4 34 .5 3 5 3 0 30 .5 3 1 31 .5 3 2 32 .5 3 3 pout (dbm) p 1 d b psa t 4. 9 5 . 0 5. 1 5 . 2 5 . 3 5 . 4 5. 5 5 . 6 5 . 7 5 . 8 5. 9 6 . 0 frequency (ghz) XP1044-QL: wcdma 3gpp downlink acpr vs. pout vd=8v, idq1=330ma, idq2=660ma -4 0 -3 6 -3 2 4 . 9g hz 5 . 0g hz 5 . 1g hz -6 0 -5 6 -5 2 -4 8 -4 4 2 3 2 3 2 4 2 4 2 5 2 5 2 6 2 6 2 7 2 7 2 8 2 8 acpr (dbc) 5 . 2g hz 5 . 3g hz 5 . 4g hz 5 . 5g hz 5 . 6g hz 5 . 7g hz 5 . 8g hz 5 . 9g hz 6 . 0g hz pout (dbm) XP1044-QL: oip3 vs. pout vd=8v, idq1=330ma, idq2=660ma 4 7 4 8 4 9 5 0 5 1 5 2 4. 9 g h z 5. 0 g h z 5. 1 g h z 3 8 3 9 4 0 4 1 4 2 4 3 4 4 4 5 4 6 4 7 1 8 1 9 2 0 2 1 2 2 2 3 2 4 2 5 2 6 2 7 2 8 oip3 (dbm) 5. 2 g h z 5. 3 g h z 5. 4 g h z 5. 5 g h z 5. 6 g h z 5. 7 g h z 5. 8 g h z 5. 9 g h z 6. 0 g h z 1 8 1 9 2 0 2 1 2 2 2 3 2 4 2 5 2 6 2 7 2 8 pout/tone (dbm) 6. 0 g h z typical performance: (ev1, idq1 = 330 ma, idq2 = 660 ma)
p1044-ql page 6 of 10 mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2010 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. 3.5-6.0 ghz 3w power amplifier module march 2010 - rev 30-mar-10 evaluation board layout: ev2 (4.0 ghz ~ 5.0 ghz) 2 c 1 c c 5 c 6 c 9 c 1 0 c 1 2 c 1 1 c 3 c 4 c 7 c 8 ref designato r description qty c 1 , c 2 10 . 0 p f 0402 c apa ci to r 1 c3, c4, c5, c 6 1000 p f 0402 c a p a ci t o r 4 c7, c8, c9, c10 1 uf a-case capacitor 4 c11, c1 2 0 .5 p f 0402 capa ci to r 2 0 1 c 9 c c5 c6 material: rogers 4003 thickness: 8mil 2 d v 1 d v t u o f r n i f r 2 c 1 c 8 c 7 c c3 c4 2 1 c 1 1 c 2 g v 1 g v
p1044-ql page 7 of 10 mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2010 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. 3.5-6.0 ghz 3w power amplifier module march 2010 - rev 30-mar-10 typical performance: (ev2, idq1 = 300 ma, idq2 = 600 ma) XP1044-QL: s21 vs. frequency vs. temp 1 8 1 9 2 0 2 1 2 2 1 4 1 5 1 6 1 7 4 4 . 1 4. 2 4 . 3 4. 4 4. 5 4. 6 4 . 7 4 . 8 4. 9 5 frequency (ghz) (db) s 2 1 XP1044-QL: s11 vs. frequency - 8 - 6 - 4 - 2 0 ( -1 6 -1 4 -1 2 -1 0 - 8 4 4. 1 4 . 2 4 . 3 4 . 4 4. 5 4 . 6 4 . 7 4 . 8 4. 9 5 frequency (ghz) (db) s1 1 XP1044-QL: s22 vs. frequency vs. temp 4 -3 -2 -1 0 -8 -7 -6 -5 - 4 4 4 . 1 4 . 2 4 . 3 4. 4 4 . 5 4. 6 4 . 7 4. 8 4 . 9 5 frequency (ghz) (db) s2 2 XP1044-QL: p1db vs. frequency vs. temp 3 2 3 4 3 6 2 4 2 6 2 8 3 0 4 4 . 1 4 . 2 4 . 3 4 . 4 4 . 5 4 . 6 4 . 7 4 . 8 4 . 9 5 frequency (ghz) p1db (dbm) + 25 o c XP1044-QL: wcdma acpr vs. frequency vs. temp -2 0 -1 0 0 -6 0 -5 0 -4 0 -3 0 4 4 . 1 4. 2 4 . 3 4. 4 4 . 5 4. 6 4 . 7 4. 8 4 . 9 5 acpr (dbc) +2 5 o c frequency (ghz) 4 8 5 0 5 2 4 0 4 2 4 4 4 6 4 4 . 1 4 . 2 4 . 3 4 . 4 4 . 5 4 . 6 4 . 7 4 . 8 4 . 9 5 oip3 (dbm) + 25 o c frequency (ghz) XP1044-QL: oip3 vs. frequency vs. temp
p in-ou t deta il s: pin 1 indicator p1044-ql page 8 of 10 mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2010 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. 3.5-6.0 ghz 3w power amplifier module march 2010 - rev 30-mar-10 physical dimensions pin assignment pin-out details pi n # function de scripti o n 3 , 4 , 5 r f i n r f inpu t 8 vg1 gate voltage 1 st stage (negative) 9 vg2 gate voltage 2 nd stage (negative) 17 , 18 , 1 9 r f ou t r f o utpu t 2 3 vd1 drain voltage 1 st stage (positive) 2 2 vd2 drain voltage 2 nd stage (positive) 1 , 2 , 6 , 7 , 10 , 11 , 12 , 13 , 14 , 15 16, 20, 21, 24, 25, 26, 27, 28 gnd
p1044-ql page 9 of 10 mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2010 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. 3.5-6.0 ghz 3w power amplifier module march 2010 - rev 30-mar-10 app note [1] biasing - the XP1044-QL requires power supply sequencing. negative voltage supply (vg) needs to be turned on first and then positive voltage can be applied to the drain (vd). when turning off the device, the positive supply (vd) should be turned off first and then negative voltage (vg) can be removed. the gate voltage is adjusted in order to set the drain current to the desired level. the gate voltage required to achieve a certain current can vary over temperature and from one device to another due to pinch-off voltage variation. constant drain current can be achieved by implementing an active bias circuit which allows for temperature compensation and eliminates the effect of pinch off voltage variation. the input stage transistor periphery is half of the output stage transistor periphery and therefore the gate voltages needed to set the first stage current to 300ma and the second stage current to 600ma are the same. the gate voltages can be connected together and a single active bias circuit can be implemented adding a total of 6 components at a cost of approximately $0.15.
p1044-ql page 10 of 10 mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2010 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. 3.5-6.0 ghz 3w power amplifier module march 2010 - rev 30-mar-10 ordering information description XP1044-QL-0n00 ni/au plated rohs compliant 7x7mm surface mount package in bulk quantity XP1044-QL-ev1 evaluation board with sma connectors for 4.9 ghz ~ 5.9 ghz XP1044-QL-ev2 evaluation board with sma connectors for 4.0 ghz ~ 5.0 ghz handling and assembly information do not ingest. do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed. observe government laws and company regulations when discarding this product. this product must be discarded in accordance with methods specified by applicable hazardous waste procedures. - mimix broadband's products are not authorized for use as critical components in life support devices or systems without the express written approval of the president and general counsel of mimix broadband. as used herein: (1) life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. (2) a critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. package attachment - this packaged product from mimix broadband is provided as a rugged surface mount package compatible with high volume solder installation. care should be taken not to apply heavy pressure to the top or base material to avoid package damage. vacuum tools or other suitable pick and place equipment may be used to pick and place this part. care should be taken to ensure that there are no voids or gaps in the solder connection so that good rf, dc and ground connections are maintained. voids or gaps can eventually lead not only to rf performance degradation, but reduced reliability and life of the product due to thermal stress. mimix lead-free rohs compliant program - mimix has an active program in place to meet customer and governmental requirements for eliminating lead (pb) and other environmentally hazardous materials from our products. all mimix rohs compliant components are form, fit and functional replacements for their non-rohs equivalents. lead plating of our rohs compliant parts is 100% matte tin (sn) over copper alloy and is backwards compatible with current standard snpb low-temperature reflow processes as well as higher temperature (260c reflow) pb free processes. caution! - mimix broadband mmic products contain gallium arsenide (gaas) which can be hazardous to the human body and the environment. for safety, observe the following procedures:
|
